Browse Categories

Polytron Medical Grade Linear Encapsulated AC-DC Power Modules

Medical Grade Power Supply
Medical Grade Power SupplyMedical Grade Power Supply

Product Options

Daburn Part Number:
Case:

REGULATED, 5VDC-250VDC, PC CARD OR CHASSIS MOUNT, EXTRA LOW NOISE, 2 MOPP FOR MEDICAL APPLICATIONS, B In-Device Operation

Medical Grade Linear Encapsulated AC-DC Power Modules Specification Sheet PDF 


FEATURES

  • 5800 VAC Input/Output Isolation
  • Reinforced Insulation
  • CE Certified
  • International Input Voltages Available Including Dual/Switchable Input Voltages
  • Meets IEC 60601-1 3rd Edition
  • Regulation Line and Load 0.02% to 0.2%
  • Very Low RMS Output Noise (See Table Below for a slection guidance)
  • 2 MOPP
  • Short Circuit Protection
  • Optional Wide Operating Temperature Range
  • 2μA Patient Leakage Current
  • Single, Dual and Triple Outputs
  • Packages Available: PC Mount, Chassis Mount with Screw Terminals

SINGLE   - All specifications are typical at nominal input, full load and 25°C, unless otherwise noted.
Daburn Part Number Output
(Vdc)
Output Current (mA) Regulation (%) Ripple & Noise
(mV rms)
Case  Slow Blow
(A)
Line Load
P34-5SM/MHIA





5
200 0.20 0.20 1.0 G, 1GT 1/32
P37/MHIA 500 0.20 0.20 0.5 A, 1AT 1/16
P37-1/MHIA 500 0.02 0.05 0.5 A, 1AT 1/16
P38/MHIA 1000 0.20 0.20 1.0 B, 1BT 1/8
P38-1/MHIA 1000 0.02 0.05 1.0 B, 1BT 1/8
P38/1.56/MHIA 1000 0.02 0.05 0.5 C, 1CT 1/8
P39/MHIA 2000 0.02 0.10 1.0 C, 1CT 1/4
P39-3/MHIA 3000 0.02 0.15 1.0 D, 1DT 3/8
P33-10SM/MHIA



10
120 0.10 0.10 1.0 E, 1ET 1/32
P33-10S/MHIA 150 0.10 0.10 1.0 A, 1AT 1/16
P34-10S/MHIA 250 0.10 0.10 1.0 B, 1BT 1/16
P37-10S/MHIA 500 0.02 0.05 0.5 C, 1CT 1/8
P38-10S/MHIA 1000 0.02 0.05 0.5 D, 1DT 3/8
P38-10SA/MHIA 1500 0.02 0.05 0.5 D, 1DT 1/4
P32-12SM/MHIA


12
100 0.10 0.10 1.0 E, 1ET 1/32
P33-12S/MHIA 120 0.02 0.10 1.0 A, 1AT 1/16
P34-12S/MHIA 200 0.10 0.10 1.0 B, 1BT 1/16
P37-12S/MHIA 500 0.02 0.10 0.5 C, 1CT 1/5
P38-12S/MHIA 1000 0.10 0.10 1.0 D, 1DT 3/10
P33-15SM/MHIA



15
80 0.10 0.10 1.0 E, 1ET 1/32
P33-15S/MHIA 120 0.02 0.10 1.0 A, 1AT 1/16
P34-15S/MHIA 200 0.10 0.10 1.0 B, 1BT 1/10
P35-15S/MHIA 300 0.10 0.10 1.0 C, 1CT 1/8
P37-15S/MHIA 500 0.02 0.10 0.5 C, 1CT 1/5
P38-15S/MHIA 800 0.02 0.10 1.0 D, 1DT 3/10
P32-18SM/MHIA

18
50 0.10 0.10 1.0 E, 1ET 1/32
P32-18S/MHIA 50 0.02 0.05 1.0 A, 1AT 1/32
P33-18S/MHIA 100 0.02 0.05 1.0 B, 1BT 1/16
P32-24SM/MHIA




24
50 0.10 0.10 1.0 E, 1ET 1/32
P33-24S/MHIA 100 0.10 0.10 1.0 A, 1AT 1/16
P34-24S/MHIA 200 0.10 0.10 1.0 B, 1BT 1/8
P35-24S/MHIA 300 0.10 0.10 1.0 C, 1CT 1/5
P37-24S/MHIA 500 0.10 0.10 1.0 D, 1DT 1/4
P38-24S/MHIA 800 0.10 0.10 1.0 H, 1HT 3/8
P39-24S/MHIA 1000 0.10 0.10 1.0 H, 1HT 1/2
P32-48S/MHIA

48
50 0.20 0.20 2.0 B, 1BT 1/16
P33-48S/MHIA 100 0.20 0.20 2.0 B, 1BT 1/8
P34-48S/MHIA 200 0.20 0.20 2.0 C, 1CT 1/4
P32-50S/MHIA


50
50 0.05 0.20 2.0 B, 1BT 1/16
P33-50S/MHIA 100 0.05 0.20 2.0 B, 1BT 1/8
P34-50S/MHIA 200 0.05 0.20 2.0 C, 1CT 1/4
P35-50S/MHIA 300 0.20 0.20 3.0 D, 1DT 3/8
P32-75S/MHIA


75
35 0.05 0.20 2.0 B, 1BT 1/10
P33-75S/MHIA 70 0.05 0.20 2.0 B, 1BT 1/5
P34-75S/MHIA 150 0.05 0.20 2.0 C, 1CT 3/10
P35-75S/MHIA 200 0.10 0.20 3.0 D, 1DT 3/8
P32-100S/MHIA


100
25 0.05 0.20 2.0 B, 1BT 1/16
P33-100S/MHIA 50 0.05 0.20 2.0 B, 1BT 1/8
P34-100S/MHIA 100 0.05 0.20 3.0 C, 1CT 1/4
P35-100S/MHIA 150 0.10 0.20 3.0 D, 3DT 3/8
P32-150S/MHIA


150
17 0.05 0.20 2.0 A,1AT  1/16
P33-150S/MHIA 35 0.05 0.20 3.0 B,1BT  2/10
P34-150S/MHIA 70 0.05 0.20 3.0 C,1CT  1/4
P35-150S/MHIA 100 0.20 0.20 3.0 D,1DT  3/8
P32-180S/MHIA


180
15 0.05 0.20 3.0 B, 1BT 1/16
P33-180S/MHIA 30 0.05 0.20 3.0 B, 1BT 1/5
P34-180S/MHIA 55 0.05 0.20 3.0 C, 1CT 1/4
P35-180S/MHIA 80 0.10 0.20 3.0 D, 1DT 3/8
P32-200S/MHIA


200
12 0.05 0.20 3.0 B, 1BT 1/16
P33-200S/MHIA 25 0.05 0.20 3.0 B, 1BT 1/8
P34-200S/MHIA 50 0.05 0.20 3.0 C, 1CT 1/4
P35-200S/MHIA 75 0.10 0.20 3.0 D, 1DT 3/8
P32-250S/MHIA


250
10 0.05 0.20 3.0 B, 1BT 1/16
P33-250S/MHIA 20 0.05 0.20 3.0 B, 1BT 1/8
P34-250S/MHIA 40 0.05 0.20 3.0 C, 1CT 1/4
P35-250S/MHIA 60 0.10 0.20 3.0 D, 1DT 3/8
DUAL   - All specifications are typical at nominal input, full load and 25°C, unless otherwise noted.
Daburn Part Number Output
(Vdc)
Output Current (mA) Regulation (%) Ripple & Noise
(mV rms)
Case  Slow Blow
(A)
Line Load
P32-5/MHIA



±5
±50 0.02 0.02 1.0 A, 2AT 1/32
P33-5/MHIA ±100 0.10 0.10 1.0 A, 2AT 1/32
P34-5/MHIA ±200 0.10 0.10 1.0 B, 2BT 1/16
P35-5/MHIA ±300 0.02 0.05 0.5 C, 2CT 1/10
P37-5/MHIA ±500 0.02 0.05 0.5 C, 2CT 1/8
P38-5/MHIA ±1000 0.01 0.10 1.0 D, 2DT 1/4
P37-8/MHIA ±8 ±500 0.10 0.10 2.0 D,2DT 1/5
P33-10/MHIA ±10 ±100 0.02 0.05 8.0 A,2AT 1/16
P31-12M/MHIA





±12
±25 0.10 0.10 2.0 G, 1GT 1/32
P31-12/MHIA ±25 0.02 0.05 0.5 A, 2AT 1/32
P32-12/MHIA ±50 0.02 0.05 0.5 A, 2AT 1/32
P33-12/MHIA ±100 0.10 0.10 1.0 A, 2AT 1/16
P34-12/MHIA ±200 0.10 0.10 1.0 B, 2BT 1/8
P35-12/MHIA ±300 0.10 0.10 1.0 C, 2CT 1/5
P37-12/MHIA ±500 0.10 0.10 1.0 D, 2DT 3/10
P38-12/MHIA ±800 0.10 0.10 1.0 D, 2DT 2/5
P31-M/MHIA









±15
±25 0.10 0.10 2.0 G, 1GT 1/32
P31/MHIA ±25 0.20 0.20 1.0 A, 2AT 1/32
P31-1/MHIA ±25 0.02 0.02 0.5 A, 2AT 1/32
P32/MHIA ±50 0.20 0.20 1.0 A, 2AT 1/16
P32-1/MHIA ±50 0.02 0.02 0.5 A, 2AT 1/16
P33/MHIA ±100 0.20 0.20 1.0 A, 2AT 1/10
P33-1/MHIA ±100 0.02 0.02 1.0 A, 2AT 1/10
P34/MHIA ±200 0.20 0.20 1.0 B, 2BT 1/5
P34-1/MHIA ±200 0.02 0.05 1.0 B, 2BT 1/5
P35/MHIA ±350 0.20 0.20 1.0 C, 2CT 1/4
P35-1/MHIA ±350 0.02 0.05 1.0 C, 2CT 1/4
P37-15/MHIA ±500 0.10 0.10 1.0 D, 2DT 3/8
P38-15/MHIA ±800 0.10 0.10 1.0 D, 2DT 1/2
P32-18/MHIA
±18
±50 0.10 0.10 1.0 A, 2AT 1/16
P33-18/MHIA ±100 0.10 0.10 1.0 B, 2BT 1/10
P32-24/MHIA

±24
±50 0.10 0.10 1.0 B, 2BT 1/16
P33-24/MHIA ±100 0.10 0.20 1.0 B, 2BT 1/8
P34-24/MHIA ±200 0.10 0.20 1.0 C, 2CT 1/4
TRIPLE   - All specifications are typical at nominal input, full load and 25°C, unless otherwise noted.
Daburn Part Number Output
(Vdc)
Output Current (mA) Regulation (%) Ripple & Noise
(mV rms)
Case  Slow Blow
(A)
Line Load
P51-12/MHIA


5/±12
250/±60 0.02 0.10 1.0 C, 3CT 1/10
P52-12/MHIA 250/±120 0.02 0.10 1.0 C, 3CT 1/10
P53-12L/MHIA 300/±180 0.02 0.10 1.0 C, 3CT 1/5
P53-12/MHIA 500/±120 0.02 0.10 1.0 C, 3CT 1/5
P53-1280/MHIA 1000/±150 0.02 0.10 1.0 D, 3DT  1/4
P51-15/MHIA


5/±15
250/±50 0.02 0.10 1.0 C, 3CT 1/10
P52-15/MHIA 250/±100 0.02 0.10 1.0 C, 3CT 1/10
P53-15L/MHIA 300/±150 0.02 0.10 1.0 C, 3CT 1/5
P53-15/MHIA 500/±100 0.02 0.10 1.0 C, 3CT 1/5
P53-1580/MHIA 1000/±150 0.02 0.10 1.0 D, 3DT 1/4
                
Notes:
  1. Case style ending with letter “T” (Chassis mounted units with terminal barrier strip) are designated by the suffix “T”. Case styles A,B,C,D,G and E (PC card mounting) do not require suffixing.
  2. Most competitors pinouts available - contact us.
  3. For 400HZ, use suffix “04” after model number.
  4. For wide operating temperature range, use “W” suffix after model number.
  5. Built for In-Device Operation



Product Reviews

(0 Ratings, 0 Reviews)
Search
Shopping Cart
Your cart is empty.
Mailing Lists