Dual-Wall Shrinkable TFE3; VW-1

Description: DAFLON SM450 is a dual wall shrink and melt TFE tubing which gives a tight, moisture-proof seal. It is made from two types of TFE. The outer wall is TFE and the inner lining is FEP. When heated to 400°F, the FEP melts, and at 621°F the TFE wall shrinks tightly. The FEP is squeezed into a solid or near solid mechanical encapsulation.

DAFLON SM450 tubing protects against most environmental hazards involving pull, vibration, moisture, chemicals, etc. It may be used over wires, terminals, splices, connectors and as a strain relief and end cap.

The outer wall meets MIL-I-23053/12.

Operating Temperature: -100 to +450°F.

This series is RoHS compliant.

Dual-Wall TFE Encapsulating Shrinkable Tubing
DABURN
Cat. No.
Minimum
I.D. As Supplied
Recovered (After Heating) Standard
Package
I.D. Max. Nom. Wall Thickness
Size IN. MM. IN. MM. IN. MM.
SM450-1 1/32" 0.036 0.91 .000** 0 0.022 0.56 100'
SM450-2 1/16" 0.060 1.52 .000** 0 0.028 0.71 100'
SM450-3 1/8" 0.130 3.30 .000** 0 0.031 0.79 100'
SM450-4 5/32" 0.160 4.06 .000** 0 0.032 0.81 100'
SM450-5 3/16" 0.190 4.83 0.062 1.57 0.035 0.89 100'
SM450-7 1/4" 0.250 6.35 0.125 3.18 0.036 0.91 100'
SM450-9 11/32" 0.350 8.89 0.190 4.83 0.036 0.91 100'
SM450-11 7/16" 0.450 11.43 0.312 7.92 0.055 1.40 100'
SM450-13 11/16" 0.700 17.78 0.440 11.18 0.055 1.40 100'
SM450-16 1" 0.950 24.13 0.680 17.27 0.065 1.65 100'
*Dupont
** Will fully close off.

Standard Package:
100 Ft. in 1 to 3 ft. lengths. Special lengths available to order.
Standard Color:
Natural.

PROPERTIES
Operating Temperature:
-75°C To +231°C
Shrinkage Temperature Nom:
327°C/621°F
Shrink Ratio:
1.4 To 1
Longitudinal Change.
Max.: ±10%

To Additional TFE Heat Shrink
To Heat Shrinkable Tubing Cross Reference Property Chart
To Lower Temperature Dual-Wall Heat Shrink Tubing.
Back to DABURN'S Home Page.


Daburn electronics & cable
224 Pegasus Ave.
Northvale, NJ 07647
Tel: 201-768-5400
Fax: 201-768-9642
E-Mail: daburn@daburn.com
URL: http://www.daburn.com/