|
Polytron Medical Grade Linear Encapsulated AC-DC Power Modules
Medical Grade Linear Encapsulated AC-DC Power ModulesMedical Grade Linear Encapsulated AC-DC Power Modules |
|
Product Options
Daburn Part Number (see chart below): |
|
Case: |
|
Personalization
Select If Want Alternate Input Voltage (Standard is 105-125 Vac)
|
CLICK TO PLAY - Power Supplies For Medical Equipment Instructional Video
REGULATED, 5VDC-250VDC, PC CARD OR CHASSIS MOUNT, EXTRA LOW NOISE, 2 MOPP FOR MEDICAL APPLICATIONS, BUILT FOR IN-DEVICE OPERATION
Medical Grade Linear Encapsulated AC-DC Power Modules Specification Sheet PDF
Click this link for Power Supply Accessories - Bench Adapters, Sockets
FEATURES
- 4000 VAC Input/Output Isolation
- Reinforced Insulation
- Meets IEC 60601-1 3rd Edition
- 2 MOPP
- 2μA Patient Leakage Current
|
- CE Certified
- Regulation Line & Load 0.02% to 0.2%
- Short Circuit Protection
- Single, Dual and Triple Outputs
|
- International & Dual/Switchable Input Voltages Available
- Very Low RMS Output Noise (See slection guidance Table Below)
- Optional Wide Operating Temperature Range
- Packages Available: PC Mount, Chassis Mount with Screw Terminals
|
SINGLE - All specifications are typical at nominal input, full load and 25°C, unless otherwise noted. |
Daburn Part Number |
Output (Vdc) |
Output Current (mA) |
Regulation (%) |
Ripple & Noise (mV rms) |
Case |
Slow Blow (A) |
Line |
Load |
P34-5SM/MHIA |
5 |
200 |
0.20 |
0.20 |
1.0 |
G, 1GT |
1/32 |
P37/MHIA |
500 |
0.20 |
0.20 |
0.5 |
B, 1BT |
1/16 |
P37-1/MHIA |
500 |
0.02 |
0.05 |
0.5 |
B, 1BT |
1/16 |
P38/MHIA |
1000 |
0.20 |
0.20 |
1.0 |
B, 1BT |
1/8 |
P38-1/MHIA |
1000 |
0.02 |
0.05 |
1.0 |
B, 1BT |
1/8 |
P38/1.56/MHIA |
1000 |
0.02 |
0.05 |
0.5 |
C, 1CT |
1/8 |
P39/MHIA |
2000 |
0.02 |
0.10 |
1.0 |
C, 1CT |
1/4 |
P39-3/MHIA |
3000 |
0.02 |
0.15 |
1.0 |
D, 1DT |
3/8 |
P33-10SM/MHIA |
10 |
120 |
0.10 |
0.10 |
1.0 |
E, 1ET |
1/32 |
P33-10S/MHIA |
150 |
0.10 |
0.10 |
1.0 |
B, 1BT |
1/16 |
P34-10S/MHIA |
250 |
0.10 |
0.10 |
1.0 |
B, 1BT |
1/16 |
P37-10S/MHIA |
500 |
0.02 |
0.05 |
0.5 |
C, 1CT |
1/8 |
P38-10S/MHIA |
1000 |
0.02 |
0.05 |
0.5 |
D, 1DT |
3/8 |
P38-10SA/MHIA |
1500 |
0.02 |
0.05 |
0.5 |
D, 1DT |
1/4 |
P32-12SM/MHIA |
12 |
100 |
0.10 |
0.10 |
1.0 |
E, 1ET |
1/32 |
P33-12S/MHIA |
120 |
0.02 |
0.10 |
1.0 |
B, 1BT |
1/16 |
P34-12S/MHIA |
200 |
0.10 |
0.10 |
1.0 |
B, 1BT |
1/16 |
P37-12S/MHIA |
500 |
0.02 |
0.10 |
0.5 |
C, 1CT |
1/5 |
P38-12S/MHIA |
1000 |
0.10 |
0.10 |
1.0 |
D, 1DT |
3/10 |
P33-15SM/MHIA |
15 |
80 |
0.10 |
0.10 |
1.0 |
E, 1ET |
1/32 |
P33-15S/MHIA |
120 |
0.02 |
0.10 |
1.0 |
B, 1BT |
1/16 |
P34-15S/MHIA |
200 |
0.10 |
0.10 |
1.0 |
B, 1BT |
1/10 |
P35-15S/MHIA |
300 |
0.10 |
0.10 |
1.0 |
C, 1CT |
1/8 |
P37-15S/MHIA |
500 |
0.02 |
0.10 |
0.5 |
C, 1CT |
1/5 |
P38-15S/MHIA |
800 |
0.02 |
0.10 |
1.0 |
D, 1DT |
3/10 |
P32-18SM/MHIA |
18 |
50 |
0.10 |
0.10 |
1.0 |
E, 1ET |
1/32 |
P32-18S/MHIA |
50 |
0.02 |
0.05 |
1.0 |
B, 1BT |
1/32 |
P33-18S/MHIA |
100 |
0.02 |
0.05 |
1.0 |
B, 1BT |
1/16 |
P32-24SM/MHIA |
24 |
50 |
0.10 |
0.10 |
1.0 |
E, 1ET |
1/32 |
P33-24S/MHIA |
100 |
0.10 |
0.10 |
1.0 |
B, 1BT |
1/16 |
P34-24S/MHIA |
200 |
0.10 |
0.10 |
1.0 |
B, 1BT |
1/8 |
P35-24S/MHIA |
300 |
0.10 |
0.10 |
1.0 |
C, 1CT |
1/5 |
P37-24S/MHIA |
500 |
0.10 |
0.10 |
1.0 |
D, 1DT |
1/4 |
P38-24S/MHIA |
800 |
0.10 |
0.10 |
1.0 |
H, 1HT |
3/8 |
P39-24S/MHIA |
1000 |
0.10 |
0.10 |
1.0 |
H, 1HT |
1/2 |
P32-48S/MHIA |
48 |
50 |
0.20 |
0.20 |
2.0 |
B, 1BT |
1/16 |
P33-48S/MHIA |
100 |
0.20 |
0.20 |
2.0 |
B, 1BT |
1/8 |
P34-48S/MHIA |
200 |
0.20 |
0.20 |
2.0 |
C, 1CT |
1/4 |
P32-50S/MHIA |
50 |
50 |
0.05 |
0.20 |
2.0 |
B, 1BT |
1/16 |
P33-50S/MHIA |
100 |
0.05 |
0.20 |
2.0 |
B, 1BT |
1/8 |
P34-50S/MHIA |
200 |
0.05 |
0.20 |
2.0 |
C, 1CT |
1/4 |
P35-50S/MHIA |
300 |
0.20 |
0.20 |
3.0 |
D, 1DT |
3/8 |
P32-75S/MHIA |
75 |
35 |
0.05 |
0.20 |
2.0 |
B, 1BT |
1/10 |
P33-75S/MHIA |
70 |
0.05 |
0.20 |
2.0 |
B, 1BT |
1/5 |
P34-75S/MHIA |
150 |
0.05 |
0.20 |
2.0 |
C, 1CT |
3/10 |
P35-75S/MHIA |
200 |
0.10 |
0.20 |
3.0 |
D, 1DT |
3/8 |
P32-100S/MHIA |
100 |
25 |
0.05 |
0.20 |
2.0 |
B, 1BT |
1/16 |
P33-100S/MHIA |
50 |
0.05 |
0.20 |
2.0 |
B, 1BT |
1/8 |
P34-100S/MHIA |
100 |
0.05 |
0.20 |
3.0 |
C, 1CT |
1/4 |
P35-100S/MHIA |
150 |
0.10 |
0.20 |
3.0 |
D, 3DT |
3/8 |
P32-150S/MHIA |
150 |
17 |
0.05 |
0.20 |
2.0 |
B, 1BT |
1/16 |
P33-150S/MHIA |
35 |
0.05 |
0.20 |
3.0 |
B,1BT |
2/10 |
P34-150S/MHIA |
70 |
0.05 |
0.20 |
3.0 |
C,1CT |
1/4 |
P35-150S/MHIA |
100 |
0.20 |
0.20 |
3.0 |
D,1DT |
3/8 |
P32-180S/MHIA |
180 |
15 |
0.05 |
0.20 |
3.0 |
B, 1BT |
1/16 |
P33-180S/MHIA |
30 |
0.05 |
0.20 |
3.0 |
B, 1BT |
1/5 |
P34-180S/MHIA |
55 |
0.05 |
0.20 |
3.0 |
C, 1CT |
1/4 |
P35-180S/MHIA |
80 |
0.10 |
0.20 |
3.0 |
D, 1DT |
3/8 |
P32-200S/MHIA |
200 |
12 |
0.05 |
0.20 |
3.0 |
B, 1BT |
1/16 |
P33-200S/MHIA |
25 |
0.05 |
0.20 |
3.0 |
B, 1BT |
1/8 |
P34-200S/MHIA |
50 |
0.05 |
0.20 |
3.0 |
C, 1CT |
1/4 |
P35-200S/MHIA |
75 |
0.10 |
0.20 |
3.0 |
D, 1DT |
3/8 |
P32-250S/MHIA |
250 |
10 |
0.05 |
0.20 |
3.0 |
B, 1BT |
1/16 |
P33-250S/MHIA |
20 |
0.05 |
0.20 |
3.0 |
B, 1BT |
1/8 |
P34-250S/MHIA |
40 |
0.05 |
0.20 |
3.0 |
C, 1CT |
1/4 |
P35-250S/MHIA |
60 |
0.10 |
0.20 |
3.0 |
D, 1DT |
3/8 |
DUAL - All specifications are typical at nominal input, full load and 25°C, unless otherwise noted. |
Daburn Part Number |
Output (Vdc) |
Output Current (mA) |
Regulation (%) |
Ripple & Noise (mV rms) |
Case |
Slow Blow (A) |
Line |
Load |
P32-5/MHIA |
±5 |
±50 |
0.02 |
0.02 |
1.0 |
B, 2BT |
1/32 |
P33-5/MHIA |
±100 |
0.10 |
0.10 |
1.0 |
B, 2BT |
1/32 |
P34-5/MHIA |
±200 |
0.10 |
0.10 |
1.0 |
B, 2BT |
1/16 |
P35-5/MHIA |
±300 |
0.02 |
0.05 |
0.5 |
C, 2CT |
1/10 |
P37-5/MHIA |
±500 |
0.02 |
0.05 |
0.5 |
C, 2CT |
1/8 |
P38-5/MHIA |
±1000 |
0.01 |
0.10 |
1.0 |
D, 2DT |
1/4 |
P37-8/MHIA |
±8 |
±500 |
0.10 |
0.10 |
2.0 |
D,2DT |
1/5 |
P33-10/MHIA |
±10 |
±100 |
0.02 |
0.05 |
8.0 |
B, 2BT |
1/16 |
P31-12M/MHIA |
±12 |
±25 |
0.10 |
0.10 |
2.0 |
G, 1GT |
1/32 |
P31-12/MHIA |
±25 |
0.02 |
0.05 |
0.5 |
B, 2BT |
1/32 |
P32-12/MHIA |
±50 |
0.02 |
0.05 |
0.5 |
B, 2BT |
1/32 |
P33-12/MHIA |
±100 |
0.10 |
0.10 |
1.0 |
B, 2BT |
1/16 |
P34-12/MHIA |
±200 |
0.10 |
0.10 |
1.0 |
B, 2BT |
1/8 |
P35-12/MHIA |
±300 |
0.10 |
0.10 |
1.0 |
C, 2CT |
1/5 |
P37-12/MHIA |
±500 |
0.10 |
0.10 |
1.0 |
D, 2DT |
3/10 |
P38-12/MHIA |
±800 |
0.10 |
0.10 |
1.0 |
D, 2DT |
2/5 |
P31-M/MHIA |
±15 |
±25 |
0.10 |
0.10 |
2.0 |
G, 1GT |
1/32 |
P31/MHIA |
±25 |
0.20 |
0.20 |
1.0 |
B, 2BT |
1/32 |
P31-1/MHIA |
±25 |
0.02 |
0.02 |
0.5 |
B, 2BT |
1/32 |
P32/MHIA |
±50 |
0.20 |
0.20 |
1.0 |
B, 2BT |
1/16 |
P32-1/MHIA |
±50 |
0.02 |
0.02 |
0.5 |
B, 2BT |
1/16 |
P33/MHIA |
±100 |
0.20 |
0.20 |
1.0 |
B, 2BT |
1/10 |
P33-1/MHIA |
±100 |
0.02 |
0.02 |
1.0 |
B, 2BT |
1/10 |
P34/MHIA |
±200 |
0.20 |
0.20 |
1.0 |
B, 2BT |
1/5 |
P34-1/MHIA |
±200 |
0.02 |
0.05 |
1.0 |
B, 2BT |
1/5 |
P35/MHIA |
±350 |
0.20 |
0.20 |
1.0 |
C, 2CT |
1/4 |
P35-1/MHIA |
±350 |
0.02 |
0.05 |
1.0 |
C, 2CT |
1/4 |
P37-15/MHIA |
±500 |
0.10 |
0.10 |
1.0 |
D, 2DT |
3/8 |
P38-15/MHIA |
±800 |
0.10 |
0.10 |
1.0 |
D, 2DT |
1/2 |
P32-18/MHIA |
±18 |
±50 |
0.10 |
0.10 |
1.0 |
B, 2BT |
1/16 |
P33-18/MHIA |
±100 |
0.10 |
0.10 |
1.0 |
B, 2BT |
1/10 |
P32-24/MHIA |
±24 |
±50 |
0.10 |
0.10 |
1.0 |
B, 2BT |
1/16 |
P33-24/MHIA |
±100 |
0.10 |
0.20 |
1.0 |
B, 2BT |
1/8 |
P34-24/MHIA |
±200 |
0.10 |
0.20 |
1.0 |
C, 2CT |
1/4 |
TRIPLE - All specifications are typical at nominal input, full load and 25°C, unless otherwise noted. |
Daburn Part Number |
Output (Vdc) |
Output Current (mA) |
Regulation (%) |
Ripple & Noise (mV rms) |
Case |
Slow Blow (A) |
Line |
Load |
P51-12/MHIA |
5/±12 |
250/±60 |
0.02 |
0.10 |
1.0 |
C, 3CT |
1/10 |
P52-12/MHIA |
250/±120 |
0.02 |
0.10 |
1.0 |
C, 3CT |
1/10 |
P53-12L/MHIA |
300/±180 |
0.02 |
0.10 |
1.0 |
C, 3CT |
1/5 |
P53-12/MHIA |
500/±120 |
0.02 |
0.10 |
1.0 |
C, 3CT |
1/5 |
P53-1280/MHIA |
1000/±150 |
0.02 |
0.10 |
1.0 |
D, 3DT |
1/4 |
P51-15/MHIA |
5/±15 |
250/±50 |
0.02 |
0.10 |
1.0 |
C, 3CT |
1/10 |
P52-15/MHIA |
250/±100 |
0.02 |
0.10 |
1.0 |
C, 3CT |
1/10 |
P53-15L/MHIA |
300/±150 |
0.02 |
0.10 |
1.0 |
C, 3CT |
1/5 |
P53-15/MHIA |
500/±100 |
0.02 |
0.10 |
1.0 |
C, 3CT |
1/5 |
P53-1580/MHIA |
1000/±150 |
0.02 |
0.10 |
1.0 |
D, 3DT |
1/4 |
Notes:
- Most competitors pinouts available - contact us.
- Built for in-device operation.
Input and Output Specifications:
|
INPUT
- Input voltage rangeOutput voltage regulation point: 90 Vac
- 105-125 Vac: 50-60 Hz (400 Hz available)
- (See chart on pages 2 and 3 of datasheet)
- Output voltage regulation point: 90 Vac
- Maximum operating voltage: 130 Vac
- Start up time: instantaneous
- Input surge voltage: 100 Vdc
|
OUTPUT
- Output power wattage: Varies by unit
- Voltage accuracy: ±1%, at FL for singles
- Line regulation: ±0.2%, single output
- Load regulation: ±0.2%, single output
- Ripple and noise: 1.0 mV RMS
- Temperature coefficient: ±0.02%/°C
- Transient response recovery time: 0.02µs
- Overvoltage protection:Output current: 130%
- Standard: 5V
- Maximum: 5.75V
- Specify OVP on part number: Other
- Output current: 130%
- Protection: Short circuit protection
|
More Specifications:
|
GENERAL
- Leakage current: 2µA
- Isolation resistance: 50 Mohms
- Operating frequency
- 50-60 Hz
- 400 Hz available
- Clearance/creepage: 2 MOPP
- Design meets safety standard: UL 60601-1 3rd Edition, 2 MOPP, CE
|
ENVIRONMENTAL
- Operating temperature range
- -25 - 71°C
- -40 - 85°C, optional
- Storage temperature range: -25 - 85°C
- Cooling: Free Air Convection
- Relative humidity: 99%, non-condensing
PHYSICAL
- Case material: Phenolic plastic
- Base material: Fr-4
- Potting material: Silicon, UL 94V0 QMF22
- Weight: Varies by unit, call factory
- Dimensions: (see datasheet)
- MTBF: 200,000 hour
|
The following options are available and denoted by a suffix to the part number. When ordering on the website they can be selected above and we will add them as a suffix to the part number. When contacting us to order they can be added as a suffix to the part number.
OPTIONS AVAILABLE
|
SUFFIX
|
220Vac
|
X
|
230Vac
|
XA
|
240Vac
|
XE
|
100Vac
|
Q
|
100/220Vac
|
QX
|
115/220
|
AX
|
Alternate Pin-Out
|
22
|
Chassis mounting with terminal barrier strip (case styles ending with letter (“T”)
|
T
|
Finger Safe Chassis Mount Terminal Barrier Strip
|
FST
|
Wide Oper. Temp Range
|
W
|
400Hz
|
04
|
|
Our 3 watt 2:1 wide input TWA3/MHIA DC-DC converter features a clearance & creepage distance of 8 mm/2 MOPP, EMI class A filter & miniature DIP package. Also features reinforced insulation & operating temperatures between -40 & 105°C with derating.
|
Designed for all Single and Dual Linear PC/Board Mount
Power Supplies in Cases A, B, C, D (see specification sheet PDF)
|
With a universal input range and high efficiency up to 92%, our 65-watt MUI65 series of AC-DC converters for medical applications has an operating temperature range of -25 to 80°C, low leakage current under 75µA and a built-in EMI class A filter.
|
Product Reviews
|
|