Browse Categories
PayPal Accept credit cards with QuickBooks Payments
Mailing Lists

#SM320 Daflex Shrink/Melt Medium Wall Adhesive Lined 3:1 Shrinkable Polyolefin Tubing


Product Options

Daburn Item #:
Color:

SM320 Specification Sheet PDF

3:1 Shrink Ratio

Semi-Rigid Medium Wall

Dual-Wall Adhesive-Lined

Flame Retardant Polyolefin Tubing



Applications


Daburn DAFLEX SM320 is a large size, medium wall adhesive lined, large ratio, heat shrinkable tubing with a meltable adhesive liner. When 120°C is applied, the tubing will shrink to 1/3 of its supplied size. As the outer wall shrinks the inner adhesive liner melts and flows. When cooled, it offers protection for a variety of electrical applications such as insulating and sealing cable splices, terminations and jacket repairs as well as retrofitting. It provides “sealed-in” protection from chemicals and oils. DAFLEX SM320 is ideally suited for shipboard, submersible, direct-buried installations or wherever tougher mechanical protection is required in an electrical insulation system.  Daburn SM320 also resists abrasion, UV radiation and is RoHS compliant.


Features

  • Shrink ratio: 67% or more in the radial direction, 20% or less in the axial direction
  • Continuous operating temperature: - 55°C (-67°F) to 125°C (230°F)
  • Flammability: UL-VW-1, CSA OFT (except clear)
  • High Carbon Black composition to resist UV radiation
  • To UL 224 Standard
  • RoHS Compliant
  • Minimum Shrink Temperature: 120°C

Product Sizes and Dimensions                                                       

Daburn

Item Number

 

 

 

 

mm

size

 

Expanded

Recovered

 

Internal Diameter (min.)

(D)

 

Internal Diameter   (max.)

(d)

 

Total Wall Thickness (Nominal)

(T)

 

In.

 

mm

 

In.

 

mm

 

In.

 

mm

SM320-0.3”

7

0.276

7.0

0.098

2.5

0.032

0.80

SM320-0.4”

10

0.402

10.2

0.150

3.8

0.060

1.52

SM320-0.75”

18

0.752

19.1

0.220

5.6

0.060

1.52

SM320-1.1”

27

1.098

27.9

0.374

9.5

0.105

2.67

SM320-1.3”

33

1.299

33.0

0.374

9.5

0.105

2.67

SM320-1.5”

38

1.500

38.1

0.500

12.7

0.140

3.56

SM320-1.7”

45

1.7

43.2

0.5

12.7

0.155

3.4

SM320-2”

50

2.00

50.8

0.752

19.1

0.142

3.60

SM320-2.7”

70

2.701

68.6

0.902

22.9

0.135

3.44

SM320-3“

75

2.953

75.0

1.252

31.8

0.104

2.64

SM321-4"

100

3.937

100.0

1.752

44.5

0.104

2.64

SM320-4.5"

115

4.488

114.0

1.752

44.5

0.130

3.30

SM320-5.5”

140

5.512

140.0

1.654

42.0

0.138

3.5

 

Standard Color: Black and Red (where indicated by -2).   Please call for other colors.

All sizes sold in 4 foot lengths only.

 Specification/Test Values


Property

Test Method

Value

 

 

 

 

Physical

 

 

 

 

 

 

 

 

 

Unaged

 Tensile strength

ASTM D638

Min. 1,200 psi

 Elongation

Min. 200%

Aged

Tensile strength

ASTM D638

Min. 1,000 psi

Elongation

Min. 100%

  Fluid

  Resist.

Tensile strength

 24°C /24 hrs

 6 Fluids

Min. 750 psi

Dielectric strength

Min. 200 Volts/Mil.

Low temperature flex

-55°Cx4hrs

No cracks

Heat shock

225°Cx4 hrs.

No cracks, flowing or dripping

Secant Modulus

ASTM D882

Max. 25,000 psi

Electrical

Dielectric strength

ASTM D2671

Min. 200 Volts/Mil.

Volume resistivity

ASTM D876

Min. 1 x 10^-13 Ohms - cm

 

Chemical

Copper corrosion

121°C/16 hrs.

No corrosion

Fungus resistance

ASTM G21

No growth

Water Absorption

ASTM D570

Max. 0.5

Flammability

ASTM D2671

Pass

 

Related Products

#SH275 Heat Shrinkable Irradiated Polyolefin Tubing MIL-I-23053/5
#SH275 Heat Shrinkable Irradiated Polyolefin Tubing MIL-I-23053/5
When exposed to heat 194°F/90°C the tubing shrinks 50% in diameter, with 5% longitudinal contraction. Controlled shrinkage to exact requirement takes place. All Purpose · 2:1 · AMS-DTL-23053/5, CL 1 & 2
#SM278-1" 4:1 Shrinkable Polyolefin Tubing MIL-I-23053/4
#SM278-1" 4:1 Shrinkable Polyolefin Tubing MIL-I-23053/4
DAFLEX SM278 is a flexible, large ratio, heat shrinkable tubing with a meltable adhesive liner. When 120°C is applied, the tubing will shrink to 25% of its supplied size (4:1). Longitudinal shrinkage is 10% maximum.
#SM450 Dual-Wall Shrinkable PTFE Encapsulating Tubing·
#SM450 Dual-Wall Shrinkable PTFE Encapsulating Tubing·
DAFLON SM450 is a dual wall shrink and melt PTFE tubing which gives a tight, moisture-proof seal. It is made from two types of PTFE. The outer wall is TFE and the inner lining is FEP.
#SH162 Daprene Heat Shrinkable Neoprene* Tubing AMS-DTL-23053/1
#SH162 Daprene Heat Shrinkable Neoprene* Tubing AMS-DTL-23053/1
This tubing meets or exceeds MIL-I-23053/1 Class 1 & 2. It shrinks down 50% of its supplied inside diameter, upon exposure to heat of 150°C/302°F - will remain elastomeric - with no cracks. Longitudinal shrinkage +5% to -10% upon complete shrinkage.
#SH265 Heat Shrinkable Polyvinylchloride Tubing (All Purpose · UL · MIL-I-23053/2 Class 2, Shrink Ratio 2:1)
#SH265 Heat Shrinkable Polyvinylchloride Tubing (All Purpose · UL · MIL-I-23053/2 Class 2, Shrink Ratio 2:1)
This non-irradiated heat shrinkable PVC tubing is flexible and shrinks 50% when heated to 100°C (212°F) for one minute or less, with approximately 15% longitudinal contraction**. There is controlled shrinkage on the application of heat.
#SH267 Heat Shrinkable Heavy Wall PVC Tubing
#SH267 Heat Shrinkable Heavy Wall PVC Tubing
This heavy wall PVC tubing shrinks 50% in diameter when heated to 95°C / 200°F for one minute or less, and has the same characteristics as the DAFLEX SH265 All Purpose Series, except for its heavier wall. The heavier wall allows for additional protection.
#SH277 4:1 Shrinkable Polyolefin Tubing
#SH277 4:1 Shrinkable Polyolefin Tubing
DAFLEX SH277 shrinkable irradiated polyolefin tubing recovers to 25% of its supplied size when full recovery is permitted. Material will shrink with the application of 120°C (250°F), is rated for continuous operation from -55°C to +135°C.
#SH290 Heat Shrinkable Irradiated Semi-Rigid Polyolefin Tubing (2:1, MIL-I-23053/6)
#SH290 Heat Shrinkable Irradiated Semi-Rigid Polyolefin Tubing (2:1, MIL-I-23053/6)
This series is designed for maximum mechanical strength at stress or points of connection. It is strong, abrasion resistant and is supplied in expanded sizes. It insulates, jackets, splices, connectors, cables & irregular shaped objects.
#SH321 3:1 SHRINKABLE POLYOLEFIN TUBING AMS-DTL-23053/5
#SH321 3:1 SHRINKABLE POLYOLEFIN TUBING AMS-DTL-23053/5
DAFLEX SH321 Heat Shrinkable Polyolefin Tubing recovers to 33% of its supplied size when fully recovered. It will shrink, with the application of only 90°C (194°F); it is rated for continuous operation from -55°C to +135°C and will withstand up to 200°C
#SH350 DAFLEX Heat Shrinkable Irradiated Kynar® Tubing AMS-DTL-23053/8
#SH350 DAFLEX Heat Shrinkable Irradiated Kynar® Tubing AMS-DTL-23053/8
DAFLEX KYNAR, a semi-rigid shrinkable polyvinylidene fluoride tubing, is free from flaws, pin holes, seams, cracks or inclusions. It is a tough, high temperature, thin wall tubing with high cut through & abrasion resistance. It shrinks 50% in diameter.
#SH400 Heat Shrinkable FEP Tubing (MIL-I-23053/11, AMS-DTL-23053/11)
#SH400 Heat Shrinkable FEP Tubing (MIL-I-23053/11, AMS-DTL-23053/11)
Made of modified extruded FEP, the SH400 series will shrink over inserted objects upon exposure to moderate heat. Heretofore, many joints, parts components, devices could not be protected because of high temperature required for shrinkage.
#SH421 DAFLON 4:1 Shrinkable PTFE Tubing (MIL-I-23053/12, AMS-DTL-23053/12)
#SH421 DAFLON 4:1 Shrinkable PTFE Tubing (MIL-I-23053/12, AMS-DTL-23053/12)
DAFLON SH421 Shrinkable PTFE Tubing recovers to approximately 25% of its expanded size when heated to the gel point (621°F). It is now possible to use shrinkable PTFE tubing over objects which require more than the standard 2:1 shrink down ratio.
#SH620 Ultra-Thin Wall PTFE Heat Shrink Tubing
#SH620 Ultra-Thin Wall PTFE Heat Shrink Tubing
This series of Daflon Heat Shrinkable ultra thin wall PTFE offers a range of sizes with ultra-thin walls and a range of shrink ratios. It shrinks at 327°C/621° F.
SH621 DAFLON Shrink PTFE Tubing
#SH621 DAFLON Shrink PTFE Tubing (MIL-I-23053/12, CLASS 3, AMS-DTL-23053/12)
ratingratingratingratingrating
#SH621 DAFLON Shrink PTFE Tubing (MIL-I-23053/12, CLASS 3, AMS-DTL-23053/12)
Made of modified extruded PTFE (polytetraflourethylene) it will shrink when heated to 621°F (327°C). Suitable where hi-temp protection is required. Color: Natural/Clear.
#SM270 Daflex Shrink/Melt Irradiated Polyolefin Tubing (Shrink Ratio 3:1, MIL-I-23053/4 Class 3†† - UL 105°C)
#SM270 Daflex Shrink/Melt Irradiated Polyolefin Tubing (Shrink Ratio 3:1, MIL-I-23053/4 Class 3†† - UL 105°C)
Daburn's dual wall polyolefin heat shrinkable tubing is designed to provide a tight moisture proof encapsulating seal. When 120°C/238°F is applied, the inner wall melts & flows, as the outer wall shrinks; forcing the melting wall to fill voids & interstic

Product Reviews

(0 Ratings, 0 Reviews)