 
|
House Pump Systems
The SICO Tank Fill System Control Panel design is based on years of hands-on experience, the latest technology and customer recommendations.
SICO provides:
- Design and Fabrication
- PLC Programming with Full Documentation
- Development of Process and Instrumentation
- Control Loop Details and Schematics
- Complete Submittals as required
- On-site system start up and debugging
- Field Calibration
- Operator Training
- Operation and Maintenance Manuals
- Turnkey Systems services
SICO Tank Fill System Control Panel is designed to:
- Monitor and maintain water level in single or multiple water storage tanks
- Monitor equipment status
- Annunciate all equipment malfunctions and alarms
- Provide all necessary system status, equipment malfunction and alarms Data to BMS and/or SCADA systems.
House Pump System Consists of 3 Parts: ***
- Factory Prefabricate Pump Skid
- Pump Control Panel
- Level Monitoring System (For ex. conductivity type level sensors, float level switches, Floatless controller, etc...)
*** SICO can provide the complete system in addition to the control panel. Contact factory for details.
Control  Panel  Features
Basement
- Enclosure Type: Nema 1
- Horsepower: 2-50 and beyond...
- Line Voltage: 208, 460
- Phase: Three
- Duplex and T riplex
- Control circuit transformer with primary and secondary fuses
- HOA (Hands Off auto) switch for each pump
- Auto alternator with manual override
- Low Tank Level audio and visual alarm
- High tank Level audio and visual alarm
- Low suction pressure audio and visual alarm with pumps shut down
- Set of dry contacts for remote alarm
- Horn with “silencer” push button.
- Human Machine Interface (HMI)
Roof
- Level Monitor for each Comp.: Conductivity Level Sensors
- Motorized valves Control selector switch
- Motorized valves status indication
- Interlock with pump control panel
Operator Interface Display
- Color touch screen: 7"
- Liquid crystal display panel
- Shows system status and alarms
- Provides access to set points, adjustments and commands
|
Operator Interface Panel will display the following:
|
Pump Color status Indication:
|
Alarms:
|
|
Pump: Run Indication
|
Gray: Ready
|
High Level Alarm
|
|
Pump: Run time Meter (Hours)
|
Green: Run
|
Low Level Alarm
|
|
|
Red: Fail
|
Low Suction Pressure
|
|
|
Pump: Fail
|
|
Tank Level Control Panel Power /Communication Fail
|
|
|