 
|
Home > Polytron Power Supplies > Polytron LWA20 Series DC-DC Converters, 20 Watt Single Output, Isolated, 2:1 Wide Input Range, 1.0" x 2.0" x 0.4"
Polytron LWA20 Series DC-DC Converters, 20 Watt Single Output, Isolated, 2:1 Wide Input Range, 1.0" x 2.0" x 0.4"
|
|
Price (Each): Call or e-mail for quotes or to order.
Available to Order
Item Number: LWA20
|
Highly efficient with low profile package
With a minimum input/output isolation of 1500 Vdc, our 20 watt single output DC-DC converter with epoxy encapsulation features a low profile package of 1.0" x 2.0" x 0.4" and an operating temperature range up to 85°C. UL and CE-approved, this design is 89% efficient and has six-sided continuous metal shielding.
LWA20 Series Specification Sheet PDF
Daburn Part
Number |
Input Voltage
(Vdc) |
Output Voltage
(Vdc) |
Output Current
(mA) |
Efficiency
(%) |
Case |
Max. Capacitor Load
(μF) |
| LWA20-24S1.5 |
24 (18-36) |
1.5 |
6000 |
79 |
P |
65000μF |
| LWA20-24S1.8 |
1.8 |
6000 |
82 |
P |
65000μF |
| LWA20-24S2.5 |
2.5 |
6000 |
84 |
P |
33000μF |
| LWA20-24S33 |
3.3 |
5000 |
86 |
P |
13000μF |
| LWA20-24S5 |
5 |
4000 |
88 |
P |
6800μF |
| LWA20-24S12 |
12 |
1670 |
87 |
P |
2200μF |
| LWA20-24S15 |
15 |
1330 |
87 |
P |
755μF |
| LWA20-48S1.5 |
48 (36-72)
|
1.5 |
6000 |
30 |
P |
65000μF |
| LWA20-48S1.8 |
1.8 |
6000 |
83 |
P |
65000μF |
| LWA20-48S2.5 |
2.5 |
6000 |
85 |
P |
33000μF |
| LWA20-48S33 |
3.3 |
5000 |
87 |
P |
13000μF |
| LWA20-48S5 |
5 |
4000 |
89 |
P |
6800μF |
| LWA20-48S12 |
12 |
1670 |
88 |
P |
2200μF |
| LWA20-48S15 |
15 |
1330 |
87 |
P |
755μF |
Input and Output Specifications:
INPUT
- Input Voltages
- 24 Vdc: 18 - 36 Vdc
- 48 Vdc: 36 - 72 Vdc
- Input Filter: L-C type
- Input reflected ripple: Nominal Vin and full load 20 mA p-p
- Start up time Nominal Vin and constant resistor load: 10 mS, typ.
- Remote on/off
- DC-DC ON: Open or 3.5V<Vr<12V
- DC-DC OFF: Short or 0V<Vr<1.2V
- Remote OFF Input current: Nominal Vin 20 mA
OUTPUT
- Voltage Accuracy: ±1% max.
- Line Regulation LL to HL at FL: ±0.2% max.
- Load Regulation 10% to 100% FL: ±0.5% max.
- Ripple and Noise (20 MHz BW): 75 mV p-p max.
- Temperature Coefficient (at FL): ±0.02%/°C max.
- Transient Response, recovery time 25% load step: 300μms max.
More Specifications:
GENERAL
- Efficiency: 79 - 89%
- Isolation Voltage: 1500 Vdc min.
- Isolation Resistance: 109 Ohms, min./1000 MOhms
- Isolation Capacitance: 1000 pF, max.
- Switching Frequency: 500 KHz, typ.
- Over Voltage Protection (Zener diode clamp)
- 1.5V output: 3.9V
- 1.8V output: 3.9V
- 2.5V output: 3.9V
- 3.3V output: 3.9V
- 5V output: 6.2V
- 12V output: 15V
- 15V output: 18V
- Short Circuit Protection: Hiccup, automatics recovery Over Load Protection: Percent of FL at nominal input 150% typ.
ENVIRONMENTAL
- Operating Temperature Range: -40 to 85°C with derating * Maximum Case Temperature: 100°C
- Storage Temperature Range: -55 to 105°C
- Thermal Impedance: Nature convection 12°C/Watt, nature convection with heat sink 10°C/Watt
- Thermal Shock: MIL-STD-810D
- Vibration: 10 - 55 Hz, 2G, 30 minutes along X, Y and Z
- Relative humidity: 5 - 95% RH
- Cooling: Free Air Convection
PHYSICAL
- Case Material: Nickel coated copper with non-conductive base
- Weight: 1.5 oz. (42.52 g)
- Dimensions: 1.00" x 2.00" x 0.40" (25.4 x 50.8 x 10.16 mm)
- MTBF: 1.791 x 106 Hours
EMC SPECIFICATIONS
- Conducted emissions: EN55022, Level A
- Radiated emissions: EN55022, Level A
- ESD: EN61000-4-2, Perf. Criteria 2
- Radiated immunity: EN61000-4-3, Perf. Criteria 2
- Fast transient: EN61000-4-4, Perf. Criteria 2
- Surge: EN61000-4-5, Perf. Criteria 2
- Conducted immunity: EN61000-4-6, Perf. Criteria 2
|
Extra small SMD or DIP package
With available 3000 Vdc input to output isolation, our 1 watt 4:1 wide input DSB(H)1 series DC-DC converter features no minimum load requirement, continuous short circuit protection and an extra small SMD or DIP package.
|
Extra wide input range (4.5-13.2V, 9-18V, 18-36V, 36-75V), wide temperature range (-40 to +105º C) and high efficiency up to 86 percent. Housed in a SIP 8 package, devices have no minimum load requirement and include remote ON/OFF, short cir. protection.
|
Extra wide input range (4.5–18 V, 9–36 V and 18–75 V), wide temperature range (-40 to +105º C) and high efficiency up to 82 percent. Housed in a SIP 8 package, no minimum load requirement, remote ON/OFF, short circuit and undervoltage protection.
|
With 80% efficiency, our 1 watt single and dual output DC-DC converter offers the options of 1000 Vdc or 3000 Vdc input/output isolation. The design also features 1-watt unregulated output power and a miniature single-inline package (SIP).
|
Low cost single-inline package
Our low cost 1-2 watt single and dual output DC-DC converter has tight regulation and a miniature single-inline package.
|
Regulated design, wide input voltage range. Our 2 watt single and dual DC-DC converter offers continuous short circuit protection and has low ripple and noise. This design also features an external on/off control and a SIP package of 0.86" x 0.36" x 0.44"
|
Our 3 watt single and dual output DC-DC converter with a 4:1 input voltage range provides continuous short circuit protection, a SIP package of 0.86" x 0.36" x 0.44" and 82% efficiency. This design also has an external on/off control and is RoHS compliant
|
High efficiency up to 83%, low ripple and noise and 3,000-Vdc input to output isolation. Miniature SIP package of 0.86 x 0.36 x 0.44 inches, ON/OFF control, low standby power and short circuit and overcurrent protection. Meets EN50155 and EN45545-2.
|
Compact and efficient design
Our low cost 0.75 watt single and dual output DC-DC converter is highly efficient with 500 Vdc input/output isolation and a miniature single-inline package.
|
Single- and dual- unregulated-output, 1-watt DC-DC converters designed for medical applications. Output voltages up to ±15 V and output currents up to 200 mA, high efficiency up to 81%, 4.2 KV AC/6 KV DC isolation.EN60601-1, ANSI/AAMI ES60601-1.
|
With a high performance pi input filter, our highly efficient and reliable 3 watt single and dual DC-DC converter has highly regulated isolated outputs, 100% burn-in, and no external components. Isolated, Regulated 24 Pin DIP Package.
|
With no external components, our 3 watt single output model of DC-DC converter has short circuit protection, a 2:1 wide input range and new 3.3 Vdc outputs. Dual output models are also available. Regulated 24 Pin DIP Package. Efficiency to 76% @ FL.
|
Our 3 watt 2:1 wide input TWA3/MHIA DC-DC converter features a clearance & creepage distance of 8 mm/2 MOPP, EMI class A filter & miniature DIP package. Also features reinforced insulation & operating temperatures between -40 & 105°C with derating.
|
DC-DC converters with internal SMD construction
Our customizable 0.5 to 1.0 watt single output DC-DC converter features a low profile, miniature DIP package, 1000 Vdc input/output isolation and internal SMD Construction.
| |
Product Reviews
|
|