 
|
Polytron MLA30 Series DC-DC Converters, 30 Watt, Wide Output Range, 3.0" × 2.5" × 0.3”
|
|
Price (Each): Call or e-mail for quotes or to order.
Available to Order
Item Number: MLA30
|
L
DC-DC converters in Low Profile Package 3.0 × 2.5 × 0.3”
Our 30 watt MLA30 series of DC-DC converters features high efficiency up to 80%, as well as short circuit and over-voltage protection in a low profile 3.0 x 2.5 x 0.3’’ package. Epoxy encapsulated, this series also features On/Off control and is RoHS II compliant.
MLA30 Series Specification Sheet PDF
Daburn Part
Number |
Input Voltage
(Vdc) |
Input Voltage
(Vdc) |
Output Voltage
(Vdc) |
Output Current
Full Load
(mA) |
Efficiency |
|
MLA30-12S5-L.34A
|
9 - 18 |
12 |
5 |
6 |
88 |
Input and Output Specifications:
INPUT
- Voltage Range: 12 Vdc
- Input Voltage Range: 9-18 Vdc
- Input Filter: Pi network
OUTPUT
- Output Voltage: 5Vdc
- Output Voltage Accuracy: ±1%
- Output Current: 6A
- Efficiency: 80%
- External Trim Adj. Range: ±10%
- Ripple and noise: 100mV p-p Max
- Short Circuit Protection: Continuous
- Line Regulation: ±0.2%
- Load Regulation: 0.5%, Single Voltage
- Transient Response: 500ms
- Transient Voltage Peak Deviation: 1% Vout
- Remote Control
- 2.5-12Vdc, Turn ON, or open circuit
- 0-0.8, Turn OFF, or short circuit Pin1 and Pin4
- 10mA, Shut down idle current
More Specifications:
GENERAL
- Isolation voltage: Input to Output (2sec/0.5mA), 12V In, 700Vdc
- Isolation resistance: 1000MOhms, 700Vdc
- Switching frequency: 300kHz
ENVIRONMENTAL
- Operating temperature range: -40 to 70°C
- Storange temperature: -40 to 70°C
- Maximum case temperature: 100°C
- Cooling: Free air convection
PHYSICAL
- Safety standards: RoHS compliant
- Case material: Nickel-coated copper with non-conductive base
- Dimensions: 3.0" x 2.5" x 0.3" (76.2mm x 63.5mm x 8.5mm)
|
Extra small SMD or DIP package
With available 3000 Vdc input to output isolation, our 1 watt 4:1 wide input DSB(H)1 series DC-DC converter features no minimum load requirement, continuous short circuit protection and an extra small SMD or DIP package.
|
Extra wide input range (4.5-13.2V, 9-18V, 18-36V, 36-75V), wide temperature range (-40 to +105º C) and high efficiency up to 86 percent. Housed in a SIP 8 package, devices have no minimum load requirement and include remote ON/OFF, short cir. protection.
|
Extra wide input range (4.5–18 V, 9–36 V and 18–75 V), wide temperature range (-40 to +105º C) and high efficiency up to 82 percent. Housed in a SIP 8 package, no minimum load requirement, remote ON/OFF, short circuit and undervoltage protection.
|
With 80% efficiency, our 1 watt single and dual output DC-DC converter offers the options of 1000 Vdc or 3000 Vdc input/output isolation. The design also features 1-watt unregulated output power and a miniature single-inline package (SIP).
|
Low cost single-inline package
Our low cost 1-2 watt single and dual output DC-DC converter has tight regulation and a miniature single-inline package.
|
Regulated design, wide input voltage range. Our 2 watt single and dual DC-DC converter offers continuous short circuit protection and has low ripple and noise. This design also features an external on/off control and a SIP package of 0.86" x 0.36" x 0.44"
|
Our 3 watt single and dual output DC-DC converter with a 4:1 input voltage range provides continuous short circuit protection, a SIP package of 0.86" x 0.36" x 0.44" and 82% efficiency. This design also has an external on/off control and is RoHS compliant
|
High efficiency up to 83%, low ripple and noise and 3,000-Vdc input to output isolation. Miniature SIP package of 0.86 x 0.36 x 0.44 inches, ON/OFF control, low standby power and short circuit and overcurrent protection. Meets EN50155 and EN45545-2.
|
Compact and efficient design
Our low cost 0.75 watt single and dual output DC-DC converter is highly efficient with 500 Vdc input/output isolation and a miniature single-inline package.
|
Single- and dual- unregulated-output, 1-watt DC-DC converters designed for medical applications. Output voltages up to ±15 V and output currents up to 200 mA, high efficiency up to 81%, 4.2 KV AC/6 KV DC isolation.EN60601-1, ANSI/AAMI ES60601-1.
|
With a high performance pi input filter, our highly efficient and reliable 3 watt single and dual DC-DC converter has highly regulated isolated outputs, 100% burn-in, and no external components. Isolated, Regulated 24 Pin DIP Package.
|
With no external components, our 3 watt single output model of DC-DC converter has short circuit protection, a 2:1 wide input range and new 3.3 Vdc outputs. Dual output models are also available. Regulated 24 Pin DIP Package. Efficiency to 76% @ FL.
|
Our 3 watt 2:1 wide input TWA3/MHIA DC-DC converter features a clearance & creepage distance of 8 mm/2 MOPP, EMI class A filter & miniature DIP package. Also features reinforced insulation & operating temperatures between -40 & 105°C with derating.
|
DC-DC converters with internal SMD construction
Our customizable 0.5 to 1.0 watt single output DC-DC converter features a low profile, miniature DIP package, 1000 Vdc input/output isolation and internal SMD Construction.
| |
Product Reviews
|
|