Browse Categories
PayPal Accept credit cards with QuickBooks Payments
Mailing Lists

Polytron MUI100 Series AC-DC Power Supply Modules, 100 Watt Universal Input For Medical Applications


Price (Each): Call or e-mail for quotes or to order.
Available to Order
Item Number: MUI100

Medical AC-DC power supplies for medical applications

Our 100 watt universal input AC-DC converter for medical applications features active power factor correction, a built-in EMI Class A filter and a low leakage current. This model also has an open frame package of 2.00" x 3.00" x 1.16" and meets the following medical safety approvals: UL, CE, ES60601-1, EN60601-1 and ANSI/AAMI.

MUI100 Series Specification Sheet PDF

 

Daburn Part
Number
Input Range
(vac) 
Output Voltage
Vdc
Output Current
@ Natural Convection 50ºC
Ta (A)
 

Input Power
@ No Load (W)
 
Efficiency (%) 

MUI100-12SB

85-264 12 8.34 0.3 91

MUI100-15SB

15 6.67 92

MUI100-24SB

24 4.17 92

MUI100-28SB

28 3.58 92

MUI100-36SB

36 2.78 91

MUI100-48SB

48 2.09 91



Input and Output Specifications:

INPUT

  • Voltage Range
    • AC Input: 85 - 264 VAC
    • DC Input: 120 - 370 VDC
  • Input Frequency
    • AC Input: 47 - 63 Hz
  • Input Current
    • 115 VAC and Full Load: 1.15 A
    • 230 VAC and Full Load: 0.55 A
  • No Load Input Power
    • 230 VAC: 0.3 Watts
  • Leakage Current
  • 264 VAC: 75µA
  • Power Factor: 0.95
  • Start up time: 1000 ms
  • Rise time: 20 ms
  • Hold up time
    • 115 VAC and Full Load: 16 ms
  • Input inrush current
    • 230 VAC: 60 A
  • Input protection
  • Internal fuse inline and neutral: T3,15A/250 VAC

 

 

OUTPUT

  • Output Power
    • Open frame: 100 Watts
  • Initial set voltage accuracy
    • 230 VAC and full Load: ±1.0%
  • Line Regulation
    • Low Line to High Line at Full Load: ±0.2%
  • Load Regulation
    • No Load to Full Load: ±0.5%
    • 10 - 90% Load: ±0.4%
  • Voltage Adjustability: ±10%
  • Minimum Load: 0%
  • Ripple and Noise (Measured by 20 MHz band width)
    • With a 10µF/25V 1206 X7R MLCC
      • 12 Vout: 120 mVp-p
    • With a 10µF/25V 1206 X7R MLCC
      • 15 Vout: 150 mVp-p
    • With a 1µF/50V 1206 X7R MLCC
      • 24 Vout: 160 mVp-p
    • With a 1µF/50V 1206 X7R MLCC
      • 28 Vout: 180 mVp-p
    • With a 1µF/50V 1206 X7R MLCC
      • 36 Vout: 190 mVp-p
    • With a 0.1µF/100V 1206 X7R MLCC
      • 48 Vout: 340 mVp-p
  • Temperature Coefficient: ±0.2%°C
  • Transient Response
    • Load step from 50 - 75% change at 2.5A/µs
      • Peak deviation: 3% Vout
      • Recovery time: 500µs
  • Over Voltage Protection
    • Percentage of Vout (nom), Latch mode: 135%
  • Over Load Protection
    • Percentage of lout rated, hiccup mode: 150%
      • 12 Vout, 15 Vout
  • Short Circuit Protection: continuous, automatic recovery

 

 

More Specifications:

GENERAL

  • Efficiency: 91 - 92%
  • Isolation Voltage 1 minute (2MOPP insulation)
    • Input to Output: 4000 VAC
    • Input (Output) to F.G: 1500 VAC
  • Isolation Resistance
    • 500 Vdc: 0.1GΩ
  • Switching Frequency: 60 kHz
  • Approvals and Standard: ANSI/AAMI, ES60601-1, IEC6060-1 and EN60601-1
  • Weight
    • MUIO: 156 g (5.50 oz)
    • MUIT: 194 g (6.84 oz)
    • MUI: 210 g (7.41 oz)
    • MUID: 232 g (8.18 oz)
  • MTBF
    • MIL-HDBK-217F Ta25°C, Full load: 7.903 x 10^5 hrs

 


ENVIRONMENTAL

  • Operating Ambient Temperature: -25 - 80°C with derating
  • Storage Temperature Range: -40 - 85°C
  • Operating Altitude: 5000 m
  • Thermal Shock: MIL-STD-810F
  • Shock: IEC68-2-27
  • Vibration: IEC68-2-6
  • Relative Humidity
    • Non-condensing: 5 - 95% RH

 

EMC CHARACTERISTICS

  • EMI
    • EN55011, EN55022 and FCC Part 18: Class A, Class B
  • Harmonic Currents
    • EN61000-3-2, Full Load: Class A and D
  • Voltage Flicker: EN61000-3-3
  • ESD
    • EN61000-4-2, Perf. Criteria A
      • Air ±8KV
      • Contact ±6KV
  • Radiated Immunity
    • EN61000-4-3: 20 V/m, Perf. Criteria A
  • Fast Transient
    • EN61000-4-4: ±2KV, Perf. Criteria A
  • Surge
    • EN61000-4-5, Perf. Criteria A
      • DM ±1KV
      • CM ±2KV
  • Conducted Immunity
    • EN61000-4-6: 20 Vrms, Perf. Criteria A
  • Dip and Interruptions
    • EN60601-1-2
      • 230 VAC 50 Hz
        • 30%: 500 mS, Perf. Criteria A
        • 60%: 100 mS, Perf. Criteria A
        • >95%: 10 mS, Perf. Criteria A
        • >95%: 5000 mS, Perf. Criteria B
      • 100 VAC 50 Hz
        • 30%: 500 mS, Perf. Criteria A
        • 60%: 100 mS, Perf. Criteria B
        • >95%: 10 mS, Perf. Criteria A
        • >95%: 5000 mS, Perf. Criteria B

 

 

 

 

 


Related Products

Polytron DSB(H)1 Series DC-DC Converters, 1 Watt Single and Dual Output Regulated, 4:1 Wide Input Range 0.52" x 0.36" x 0.40"
Polytron DSB(H)1 Series DC-DC Converters, 1 Watt Single and Dual Output Regulated, 4:1 Wide Input Range 0.52" x 0.36" x 0.40"
Extra small SMD or DIP package With available 3000 Vdc input to output isolation, our 1 watt 4:1 wide input DSB(H)1 series DC-DC converter features no minimum load requirement, continuous short circuit protection and an extra small SMD or DIP package.
Polytron HEA2 Series DC-DC Converters, 2 Watt Single and Dual Output 2:1 Wide Input Range 1.25” × 0.80” × 0.40” (31.8 × 20.3 × 10.2 mm)
Polytron HEA2 Series DC-DC Converters, 2 Watt Single and Dual Output 2:1 Wide Input Range 1.25” × 0.80” × 0.40” (31.8 × 20.3 × 10.2 mm)
Extra wide input range (4.5-13.2V, 9-18V, 18-36V, 36-75V), wide temperature range (-40 to +105º C) and high efficiency up to 86 percent. Housed in a SIP 8 package, devices have no minimum load requirement and include remote ON/OFF, short cir. protection.
Polytron HEB2 Series DC-DC Converters, 2 Watt Single and Dual Output 4:1 Wide Input Range 1.86” × 0.16” × 0.36” (21.84 × 4.06 × 9.14 mm)
Polytron HEB2 Series DC-DC Converters, 2 Watt Single and Dual Output 4:1 Wide Input Range 1.86” × 0.16” × 0.36” (21.84 × 4.06 × 9.14 mm)
Extra wide input range (4.5–18 V, 9–36 V and 18–75 V), wide temperature range (-40 to +105º C) and high efficiency up to 82 percent. Housed in a SIP 8 package, no minimum load requirement, remote ON/OFF, short circuit and undervoltage protection.
Polytron SPU1 Series DC-DC Converters, 1 Watt Single & Dual Output, Unregulated single inline package 0.77" x 0.24" x 0.40"
Polytron SPU1 Series DC-DC Converters, 1 Watt Single & Dual Output, Unregulated single inline package 0.77" x 0.24" x 0.40"
With 80% efficiency, our 1 watt single and dual output DC-DC converter offers the options of 1000 Vdc or 3000 Vdc input/output isolation. The design also features 1-watt unregulated output power and a miniature single-inline package (SIP).
Polytron SW1 Series DC-DC Converters, 1 to 2 Watt, Single and Dual Output, 1.25” x 0.34” x 0.57”
Polytron SW1 Series DC-DC Converters, 1 to 2 Watt, Single and Dual Output, 1.25” x 0.34” x 0.57”
Low cost single-inline package Our low cost 1-2 watt single and dual output DC-DC converter has tight regulation and a miniature single-inline package.
Polytron SWA2 Series DC-DC Converters, 2 Watt Single and Dual Output With Miniature SIP Package 0.86" x 0.36" x 0.44"
Polytron SWA2 Series DC-DC Converters, 2 Watt Single and Dual Output With Miniature SIP Package 0.86" x 0.36" x 0.44"
Regulated design, wide input voltage range. Our 2 watt single and dual DC-DC converter offers continuous short circuit protection and has low ripple and noise. This design also features an external on/off control and a SIP package of 0.86" x 0.36" x 0.44"
Polytron SWB3 Series DC-DC Converters, 3 Watt Single & Dual Output, Regulated Wide Input, 4:1 0.86" x 0.36" x 0.44"
Polytron SWB3 Series DC-DC Converters, 3 Watt Single & Dual Output, Regulated Wide Input, 4:1 0.86" x 0.36" x 0.44"
Our 3 watt single and dual output DC-DC converter with a 4:1 input voltage range provides continuous short circuit protection, a SIP package of 0.86" x 0.36" x 0.44" and 82% efficiency. This design also has an external on/off control and is RoHS compliant
Polytron SWBR3 Series DC-DC Converters, 3 Watt 4:1 Wide Input Range, Miniature SIP Package for Railway Applications 0.86 x 0.36 x 0.44
Polytron SWBR3 Series DC-DC Converters, 3 Watt 4:1 Wide Input Range, Miniature SIP Package for Railway Applications 0.86 x 0.36 x 0.44
High efficiency up to 83%, low ripple and noise and 3,000-Vdc input to output isolation. Miniature SIP package of 0.86 x 0.36 x 0.44 inches, ON/OFF control, low standby power and short circuit and overcurrent protection. Meets EN50155 and EN45545-2.
Polytron SWU0.75 Series DC-DC Converters, 0.75 Watt, Single and Dual Output, 0.77” x 0.24” x 0.40”
Polytron SWU0.75 Series DC-DC Converters, 0.75 Watt, Single and Dual Output, 0.77” x 0.24” x 0.40”
Compact and efficient design Our low cost 0.75 watt single and dual output DC-DC converter is highly efficient with 500 Vdc input/output isolation and a miniature single-inline package.
Polytron SWU1/MHIA Series DC-DC Converters, 1 Watt Single and Dual Output, 7-pin SIP Package for Medical Applications 0.77” × 0.39” × 0.5”
Polytron SWU1/MHIA Series DC-DC Converters, 1 Watt Single and Dual Output, 7-pin SIP Package for Medical Applications 0.77” × 0.39” × 0.5”
Single- and dual- unregulated-output, 1-watt DC-DC converters designed for medical applications. Output voltages up to ±15 V and output currents up to 200 mA, high efficiency up to 81%, 4.2 KV AC/6 KV DC isolation.EN60601-1, ANSI/AAMI ES60601-1.
Polytron TW3 Series DC-DC Converters, 3 Watt Single & Dual Output, Isolated, Regulated 24 Pin DIP Package 1.25" x 0.80" x 0.40"
Polytron TW3 Series DC-DC Converters, 3 Watt Single & Dual Output, Isolated, Regulated 24 Pin DIP Package 1.25" x 0.80" x 0.40"
With a high performance pi input filter, our highly efficient and reliable 3 watt single and dual DC-DC converter has highly regulated isolated outputs, 100% burn-in, and no external components. Isolated, Regulated 24 Pin DIP Package.
Polytron TWA3 Series DC-DC Converters, 3 Watt Single & Dual Output, 24 Pin DIP Package 1.25” x 0.80” x 0.50”
Polytron TWA3 Series DC-DC Converters, 3 Watt Single & Dual Output, 24 Pin DIP Package 1.25” x 0.80” x 0.50”
With no external components, our 3 watt single output model of DC-DC converter has short circuit protection, a 2:1 wide input range and new 3.3 Vdc outputs. Dual output models are also available. Regulated 24 Pin DIP Package. Efficiency to 76% @ FL.
Polytron TWA3/MHIA5 Series DC-DC Converters, 3 Watt Single and Dual Output 2:1 Wide Input Range for Medical Applications 1.25" x 0.80" x 0.40"
Polytron TWA3/MHIA5 Series DC-DC Converters, 3 Watt Single and Dual Output 2:1 Wide Input Range for Medical Applications 1.25" x 0.80" x 0.40"
Our 3 watt 2:1 wide input TWA3/MHIA DC-DC converter features a clearance & creepage distance of 8 mm/2 MOPP, EMI class A filter & miniature DIP package. Also features reinforced insulation & operating temperatures between -40 & 105°C with derating.
Polytron TWU1 Series DC-DC Converters, 0.5 to 1 Watt Single Output 0.50” x 0.40” x 0.25”
Polytron TWU1 Series DC-DC Converters, 0.5 to 1 Watt Single Output 0.50” x 0.40” x 0.25”
DC-DC converters with internal SMD construction Our customizable 0.5 to 1.0 watt single output DC-DC converter features a low profile, miniature DIP package, 1000 Vdc input/output isolation and internal SMD Construction.

Product Reviews

(0 Ratings, 0 Reviews)