 
|
Home > Polytron Power Supplies > Polytron PLS(H)10-12T Series, DC-DC Converters, 10 AMP, SMD: 1.30" x 0.53" x 0.30", SIP: 2.00" x 0.50" x 0.28"
Polytron PLS(H)10-12T Series, DC-DC Converters, 10 AMP, SMD: 1.30" x 0.53" x 0.30", SIP: 2.00" x 0.50" x 0.28"
|
|
Price (Each): Call or e-mail for quotes or to order.
Available to Order
Item Number: PLS(H)10-12T
|
Highly efficient DC-DC converters with input under-voltage protection
With fixed switching frequency and SMD and SIP packages, our 10 amp PLS(H)10 series of DC-DC converters features input under-voltage protection, an input range from 8.3 to 14 Vdc and high efficiency up to 93% at 3.3V full load. This model also meets all UL60950-1, EN60950-1 and IEC60950-1 safety standards.
PLS(H)10-12T Series Specification Sheet PDF
Daburn Part
Number |
Input Range
(Vdc) |
Output Voltage
Vdc |
Output Current Load
A
Min. |
Output Current Load
A
Max. |
ON/OFF Logic |
Efficiency
%
(5.0Vin, 3.3Vdc @ 6A)
|
|
|
PLS10-12T
|
Vout(set)
≤ 3.63V
Vin = 8.3-14Vdc
Vout(set)
> 3.63V
Vin = 8.3 - 13.2Vdc
|
0.75 ~ 5Vdc |
0 |
10 |
negative |
93 |
SMD |
|
PLS10-12TP
|
0.75 ~ 5Vdc |
0 |
10 |
positive |
93 |
SMD |
|
PLH10-12T
|
0.75 ~ 5Vdc |
0 |
10 |
negative |
93 |
Vertical Mounting SIP
|
|
PLH10-12TP
|
0.75 ~ 5Vdc |
0 |
10 |
positive |
93 |
Vertical Mounting SIP
|
|
PLH10-12TA
|
0.75 ~ 5Vdc |
0 |
10 |
negative |
93 |
Horizontal Mounting SIP
|
|
PLH10-12TAP
|
0.75 ~ 5Vdc |
0 |
10 |
positive |
93 |
Horizontal Mounting SIP
|
Input and Output Specifications:
INPUT
- Operating input voltage range: Vin (nom) = 12V
- 8.3 - 14 Vdc: Vout (set) ≤ 3.63V
- 8.3 - 13.2 Vdc: Vout (set) > 3.63V
- Input filter: C filter
- Maximum input current: 7A
- Vin = 8.3 to 14V; lo = lo(max.)
- Input reflected ripple current: 20 mAp-p
- 5-20 MHz, 1µH source impedance
- Input current no load: Vin = 12V, lo=0, module enabled
- 40 mA: Vout (set) = 0.75 Vdc
- 100 mA: Vout (set) = 5 Vdc
- Start-up voltage: 7.9 Vdc
- Shut-down voltage: 7.8 Vdc
- Remote On/Off
- Negative logic, standard
- 1 in = 10µA, max.
- ON = Open or 0V < Vr < 0.3V
- 1 in = 1µA, max.
- OFF = 2.5V < Vr < Vin (max.)
- Positive logic, option
- 1 in = 10µA, max.
- ON = Open or (Vin -4) < Vr < Vin (max.)
- 1 in = 1µA, max.
- Remote off input current: 2.0 mA (nominal)
- Rise time: 6 mS max., 10 to 90% Vout (set)
- Turn-on delay time
- Case 1: 3 ms
- Case 2: 3 ms
OUTPUT
- Output current: 10A max.
- Voltage accuracy: ±2%, Vout (set)
- Line regulation:
- Vin = Vout (set) + 0.5V to Vin (max.) at full load
- ±3%: Vout (set)
- Load regulation: No load to full load: ±4, Vout (set)
- Minimum load: 0%
- Output current limit: 220%
- Voltage adjustability: 0.7525 - 5.0 V
- Ripple and noise
- Measured by 20MHz bandwidth
- 30 mVrms, max.
- 75 mVp-p, max.
- Temperature coefficient: ±0.4%/°C
- Output voltage overshoot-startup
- 1% Vout (set)
- Vin = Vin (min.) - Vin (max), F.L.
- Dynamic load response
- Note 2
- 200 mV: ∆lo/∆t = 2.5A/µs, Vin (nom), peak deviation
- 25 µs: Load change step (50 to 100% or 100 to 50% of lo(max.)), setting time (Vout < 10% peak deviation)
- Note 3
- 100 mV: ∆lo/∆t = 2.5A/µs, Vin (nom), peak deviation
- 25 µs: Load change step (50 to 100% or 100 to 50% of lo(max.)), setting time (Vout < 10% peak deviation)
- External load capacitance
- 1000µF, ESR ≥ 1mΩ
- 5000µF, ESR ≥ 10mΩ
- Short circuit protection: continuous, automatics recovery
More Specifications:
GENERAL
- Isolation voltage: None
- Switching frequency: 300 kHz, ±10%
- Design meet safety standard: UL60950-1, EN60950-1, IEC60950-1
ENVIRONMENTAL
- Operating ambient temperature: -40 to 85°C
- Storage temperature range: -55 to 125°C
- Over temperature protection: 125°C
- Thermal shock: MIL-STD-810F
- Vibration: MIL-STD-810F
- Relative humidity
- Non-condensing: 5 to 95% RH
- Lead-free reflow solder process: IPC J STD-020D
- Moisture sensitivity level (MSL): Level 2a
PHYSICAL
- Dimensions
- SMD: 1.30 x 0.53 x 0.30 inches (33.0 x 13.5 x 7.7 mm)
- SIP: 2.00 x 0.50 x 0.28 inches (50.8 x 12.7 x 0.28 mm)
- Weight: 6.0 g (0.22 oz.)
- MTBF: 3.355 x 106 hours, MIL-HDBK-217F
|
Extra small SMD or DIP package
With available 3000 Vdc input to output isolation, our 1 watt 4:1 wide input DSB(H)1 series DC-DC converter features no minimum load requirement, continuous short circuit protection and an extra small SMD or DIP package.
|
Extra wide input range (4.5-13.2V, 9-18V, 18-36V, 36-75V), wide temperature range (-40 to +105º C) and high efficiency up to 86 percent. Housed in a SIP 8 package, devices have no minimum load requirement and include remote ON/OFF, short cir. protection.
|
Extra wide input range (4.5–18 V, 9–36 V and 18–75 V), wide temperature range (-40 to +105º C) and high efficiency up to 82 percent. Housed in a SIP 8 package, no minimum load requirement, remote ON/OFF, short circuit and undervoltage protection.
|
With 80% efficiency, our 1 watt single and dual output DC-DC converter offers the options of 1000 Vdc or 3000 Vdc input/output isolation. The design also features 1-watt unregulated output power and a miniature single-inline package (SIP).
|
Low cost single-inline package
Our low cost 1-2 watt single and dual output DC-DC converter has tight regulation and a miniature single-inline package.
|
Regulated design, wide input voltage range. Our 2 watt single and dual DC-DC converter offers continuous short circuit protection and has low ripple and noise. This design also features an external on/off control and a SIP package of 0.86" x 0.36" x 0.44"
|
Our 3 watt single and dual output DC-DC converter with a 4:1 input voltage range provides continuous short circuit protection, a SIP package of 0.86" x 0.36" x 0.44" and 82% efficiency. This design also has an external on/off control and is RoHS compliant
|
High efficiency up to 83%, low ripple and noise and 3,000-Vdc input to output isolation. Miniature SIP package of 0.86 x 0.36 x 0.44 inches, ON/OFF control, low standby power and short circuit and overcurrent protection. Meets EN50155 and EN45545-2.
|
Compact and efficient design
Our low cost 0.75 watt single and dual output DC-DC converter is highly efficient with 500 Vdc input/output isolation and a miniature single-inline package.
|
Single- and dual- unregulated-output, 1-watt DC-DC converters designed for medical applications. Output voltages up to ±15 V and output currents up to 200 mA, high efficiency up to 81%, 4.2 KV AC/6 KV DC isolation.EN60601-1, ANSI/AAMI ES60601-1.
|
With a high performance pi input filter, our highly efficient and reliable 3 watt single and dual DC-DC converter has highly regulated isolated outputs, 100% burn-in, and no external components. Isolated, Regulated 24 Pin DIP Package.
|
With no external components, our 3 watt single output model of DC-DC converter has short circuit protection, a 2:1 wide input range and new 3.3 Vdc outputs. Dual output models are also available. Regulated 24 Pin DIP Package. Efficiency to 76% @ FL.
|
Our 3 watt 2:1 wide input TWA3/MHIA DC-DC converter features a clearance & creepage distance of 8 mm/2 MOPP, EMI class A filter & miniature DIP package. Also features reinforced insulation & operating temperatures between -40 & 105°C with derating.
|
DC-DC converters with internal SMD construction
Our customizable 0.5 to 1.0 watt single output DC-DC converter features a low profile, miniature DIP package, 1000 Vdc input/output isolation and internal SMD Construction.
| |
Product Reviews
|
|