 
|
RENUI500 Series AC/DC Power Supplies for Industrial Applications
|
|
Price (Each): Call or e-mail for quotes or to order.
Available to Order
Item Number: RENUI500
|
RENUI500 Series AC/DC Power Supplies
RENUI500 Series of industrial power supplies deliver up to 500 watts of power with no minimum load requirement. They accept 85 to 264 V AC universal input, provide 3,000V AC reinforced and meet the UL/IEC/EN 62368-1 safety standard. These OVC III-compliant RENUI500 supplies measure 4.6 x 2.4 x 0.5 inches, offer up to 93 percent efficiency and feature power good signal, remote ON/OFF, active droop current share and low standby power. Built-in safeguards include over temperature and overvoltage protection. The RENUI500 Series complies with RoHS and REACH regulations.
RENUI500 Series Specification Sheet PDF
Daburn Part
Number |
Input Voltage Range
Vac |
Output Voltage
Vdc
Vdc |
Output Current @ 230Vac Conduction Cooling
A |
Input Power at No Load
W |
Efficiency
% |
Maximum Capacitor Load
µF |
|
RENUI500-12S
|
85-264 |
12 |
42 |
0.6 |
91 |
20,000 |
|
RENUI500-15S
|
85-264 |
15 |
33.5 |
0.6 |
91 |
12,000 |
|
RENUI500-24S
|
85-264 |
24 |
21 |
0.6 |
93 |
4,000 |
|
RENUI500-28S
|
85-264 |
28 |
18 |
0.6 |
93 |
3,000 |
|
RENUI500-48S
|
85-264 |
48 |
10.5 |
0.6 |
93 |
1,000 |
|
RENUI500-54S
|
85-264 |
54 |
9.4 |
0.6 |
93 |
820 |
Input and Output Specifications:
INPUT
- Voltage Range:
- AC Input: 85 - 264Vdc
- DC Input: 88 - 370Vdc
- Input Frequency: AC Input: 47Hz Min.
- Input Current:
- 100 VAC and full load: 6.3A
- 240 VAC and full load: 2.7A
- No Load Input Power
- Power factor: 0.95
- Start-up time: 2000ms
- Rise time: 20ms
- Hold-up time: 115 Vac: 16ms
- Input Inrush Current: 230 Vac: 30A
- Input Protection: External fuse in line: T10A/250Vac
OUTPUT
- Output Power: 500 W, Conduction cooling @ 230Vac
- Voltage Accuracy: 230Vac and Full Load: ±1.0%
- Line Regulation: Low Line to High Line at Full Load: ±0.2%
- Load Regulation:
- No Load to Full Load: ±0.5%
- 10% to 90% Load: ±0.4%
- Voltage Adjustability:
- Maximum output deviation is inclusive of remote sense: ±10%
- Only for Load Shared Models (-S suffix): ±5%
- Minimum Load: 0%
- Ripple and Noise (Measured by 20MHz bandwidth with a 1µF/50V 1206 X7R MLCC)
- 12Vout: 200mVp-p
- 15Vout: 200mVp-p
- 24Vout: 240mVp-p
- 28Vout: 280mVp-p
- 48Vout: 480mVp-p
- 54Vout: 280mVp-p
- Temperature Coefficient: ±0.02%/ºC
- Transient Response Peak Deviation: Load step from 50-75% change at 2.5A/μs: 3% Vout
- Transient Response Recovery Time: Recovery within 1% Vout: 600μs
- Over Voltage Protection: % of Vout(nom); Latch mode: 115 - 135
- Over Load Protection: % of Iout rated; Hiccup mode: 145%
- Short Circuit Protection: Continuous, automatic recovery
- Remote ON/OFF
- 0-0.8 Vdc or Open: External power supply is required, Iutput OFF
- 4.5-12.5 Vdc: Between +Ctrl and -Ctrl, Output OFF
- 20mA Max.: Input current
- Main output Power Good signal
- Power good, Low (Referenced to "GND")
- Power off, Open collector
- Load Share: Current Share Function, The converter can parallel to increase out put current. It has internal load share function in theis converter
- Current Share Function: 4%, No Load to Full Load
- Load Share Accuracy: 20%, Full Load
More Specifications:
GENERAL
- Isolation Voltage:
- Input to Output, 1 minute (Reinforced insulation): 3,000Vac
- Input to Base-Plate: 2,500Vac
- Output to Base-Plate: 1,500Vac
ENVIRONMENTAL
- Operating Base-Plate Temperature:
- With derating, Option -F (with Fan): -40-105ºC
- Storage Temperature Range: -55-125ºC
- Over temperature protection: 115°C (Internal thermistor; Hiccup mode)
- Operating Altitude: 5000m
- Thermal Shock: MIL-STD-810F
- Shock: MIL-STD-810F
- Vibration: MIL-STD-810F
- Relative Humidity: Non-condensing, 5% to 95% RH
PHYSICAL
- Design Meet Safety Standard: IEC/EN/UL 62368-1
- Dimensions: 4.6 × 2.4 × 0.5 inches
(116.8 × 61 × 12.7 mm)
- Case Material: Aluminum base-plate with plastic case
- Potting material: Silicone (UL94 V-0)
- Weight: 210g (7.40oz)
- MTBF: 2.500 × 105 hrs, MIL-HDBK-217F, Full Load
EMC CHARACTERISTICS
- EMI:
- EN55032 and FCC Part 15
- Conducted: Class B
- Radiated: Class A
- Harmonic Currents: EN61000-3-2, Full load, Class D
- Voltage Flicker: EN61000-3-3
- EMS: EN55035
- ESD: EN61000-4-2, Perf. Criteria A
- Radiated Immunity: EN61000-4-3, 20V/m, Perf. Criteria A
- Fast Transient: EN61000-4-4, ±2kV, Perf. Criteria A
- Surge: EN61000-4-5, DM ±1kV and CM±2kV, Perf. Criteria A
- Conducted Immunity: EN61000-4-6, 10 Vr.m.s, Perf. Criteria A
- Power Frequency Magnetic Field: EN61000-4-8, 100 A/m continuous, Perf. Criteria A
- Dip and Interruptions: EN61000-4-11
|
Product Reviews
|
|